CC1352P1F3RGZR XCC1352P1F3RGZR-SimpleLink™ Multiband CC1352P Wireless MCU With Integrated Power Amplifier
About the CC1352P(PREVIEW),Device has been announced but is not in production. The Samples of qualified device still is not be availabled at present.
Description:
The CC1352P device is a multiprotocol Sub-1 and 2.4-GHz wireless MCU targeting Wireless M-Bus, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Thread, Zigbee®, KNX RF, Wi-SUN®, Bluetooth® 5 low energy, and proprietary systems. The device contains a +20-dBm integrated high-power amplifier with best-in-class efficiency for long-range applications.
The CC1352P device is a member of the CC26xx and CC13xx family of cost-effective, ultra-low power, 2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current, in addition to sub-µA sleep current with up to 80KB of RAM retention, provide excellent battery lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.
The CC1352P device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352P device does not come at the expense of RF performance; the CC1352P device has excellent sensitivity and robustness (selectivity and blocking) performance.
The CC1352P device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter.
Sensors can be handled in a very low-power manner by a programmable, autonomous ultra-low power Sensor Controller CPU with 4KB of SRAM for program and data. The Sensor Controller, with its fast wake-up and ultra-low-power 2-MHz mode is designed for sampling, buffering, and processing both analog and digital sensor data; thus the MCU system can maximize sleep time and reduce active power.
The CC1352P device is part of the SimpleLink™ microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change.
Specification:
Microcontroller
Powerful Arm®Cortex®-M4F Processor
EEMBC CoreMark® Score: 148
Clock Speed Up to 48 MHz
352KB of In-System Programmable Flash
256KB of ROM for Protocols and Firmware
8KB of Cache SRAM (Available as General-Purpose RAM)
80KB of Ultra-Low Leakage SRAM
2-Pin cJTAG and JTAG Debugging
Supports Over-the-Air Upgrade (OTA)
Ultra-Low Power Sensor Controller With 4KB of SRAM
Sample, Store, and Process Sensor Data
Operation Independent From System CPU
Fast Wake-Up for Low-Power Operation
TI-RTOS, Drivers, Bootloader, Bluetooth® 5 low energy Controller, and IEEE 802.15.4 MAC in ROM for Optimized Application Size
RoHS-Compliant Package
7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
Peripherals
Digital Peripherals Can be Routed to Any GPIO
4× 32-Bit or 8× 16-Bit General-Purpose Timers
12-Bit ADC, 200 kSamples/s, 8 Channels
2× Comparators With Internal Reference DAC
(1× Continuous Time, 1× Ultra-Low Power)
Programmable Current Source
2× UART
2× SSI (SPI, MICROWIRE, TI)
I2C
I2S
Real-Time Clock (RTC)
AES 128- and 256-bit Crypto Accelerator
ECC and RSA Public Key Hardware Accelerator
SHA2 Accelerator (Full Suite Up to SHA-512)
True Random Number Generator (TRNG)
Capacitive Sensing, Up to 8 Channels
Integrated Temperature and Battery Monitor
